Training

Health and Safety Training Page


+/- Safe Pass:

Course: Safe Pass      
Aim of Course: 
Safe Pass is a one-day safety awareness programme aimed at all who work on Construction sites.  The aims of the programme are to:
• raise the standard of safety awareness in the construction industry
• ensure that all site personnel after completing the one day awareness programme can make a positive contribution to the prevention of accidents and ill health while working on the site
• maintain a register of personnel who have received training
• provide participants with a SOLAS Safe Pass registration card, indicating that the holder has attended a formal course in health and safety awareness.
Course Content:
• Promoting a Safety culture
• Legislation; duties of employer / employee
• Accident report & investigation
• Working at Heights
• Excavations & Confined spaces
• Working with electricity underground and overhead services
• Safe use of vehicles
• Noise & Vibration
• Use of hand held equipment
•Manual Handling
• PPE
• Multiple choice exam

Course Duration: 1 day
No of delegates: Max 20
Certification: On successful completion delegates will receive SOLAS Safe Pass card valid for 4 years.

+/- Construction Skills Certificate Scheme (CSCS):
CSCS Location Underground Services
Aim of Course:
The aim of the course is to ensure that operators become competent in the safe use of Underground detection cable locator equipment.

Course Content:

• Legislation
• Duties of designer, PSCS, Contractors, employer /employees
• Planning and procedures
• Safe systems and procedures, preparing to dig, installation service
• Cable avoidance tools, CAT & Genny Transmitter
• Searching for services, pinpointing services, clamping
• Exposure of Services
• Safe operation of Plant, Safe Digging, accidental contact, Safety in Excavations
• Emergency Situations: injuries, report accidents
• Module evaluate exercise

Course Duration: 2 days
No of delegates: Max 08
Certification: On successful completion a SOLAS Card & FETAC Certificate will be issued valid for 5 years.

+/- CSCS Signing, Lighting & Guarding at Roadwork's:

3 Day Signing Lighting & Guarding at Roadwork's (CSCS FETAC level 5)

Aim of Course:
Candidates who successfully complete this course will be trained, able and motivated to plan, organise, direct and manage the safe flow of traffic through roadwork's, in both rural and urban situations, with a minimum of delay to road users.
Course Content:
• Introduction to Traffic Management; traffic management layouts, devices & application
• Legislation
• Motorways & Dual Carriageways
•Static & Semi Static operation
• Requirements for the installation of Traffic Management
• Traffic layout sheet as set per chapter 8 & "Guidance for Control & Management of Traffic @ Roadwork's"
• Install, maintain & remove signs & devices used on roadworks
• Classroom Practical & Site Practical
• Final day Classroom & on Site Practical

Course Duration: 3 days
No of delegates: Max 08
Certification: On successful completion a FETAC Certificate SOLAS CSCS Card will be issued valid for 5 years.

+/- CSCS Plant & Machinery:

CSCS Plant & Machinery Experience Operators
Recognition of Prior Learning
We deliver CSCS training for the following categories:
360 Excavators, Mini Digger, Articulated Dumper, Site Dumper, Telescopic Handler & Slinger Signaller.
SOLAS have now introduced a programme for individuals who have the necessary experience in driving the above machines but do not currently hold a CSCS card. Individuals who meet the requirements * can now apply to take part in a one day assessment.

*Delegate requirements:
Application form for Recognition of Prior learning
Endorsement of operating competence
Skills Self Analysis
Evidence of Training (formal or inform)
Evidence of Experience:
Current /Previous Employers Statements outlining dates /locations type of work activities/duration
Managers / Supervisors references
Evaluation reports from current/ previous employers
A detailed list of relevant work activities including names address Locations contact details of employers, detailed breakdown of work activities.

Duration: 1 day (Interview / assessment prior to the 1 day to assess documentation)

Max Number of Delegate: 04

Certification: SOLAS CSCS / FETAC Level 5 Certification, valid for 5 years.

+/- Mobile Access Aluminium Tower:
Who is the course aimed towards:
This course is aimed towards anybody who use aluminium tower scaffolding either erection or dismantling in the course of their work.
Course Content:
• Current Legislation in relation to working at Heights
• Pre works inspections
• Loading
• Tower erection & dismantling
• Practical Assessment
• Written Assessment
• Handover forms & WH1

Course Duration:
1 Day for experienced operators
2 Days for Non-Experienced
Certification:
SOLAS CSCS Card & FETAC Certificate valid for 5 years
Requirements:
Safe Pass, PPS number, 1 x Passport photo, PPE gear

+/- Other Plant / Machinery :

1 Day Vehicle Banksman Training
Aim of Course:
Aim of the course is to enables delegates control vehicles on site to ensure the safety of drivers and individuals, become competent to use a safe system of work to ensure banksman and driver's safety.
Course Contents
• Legislation employers and employees duties
• Implement and monitor Safe System of work
• Site Layout and internal traffic routes - Management of site activities
• Vehicle maintenance & Vehicle movements
• Loading & unloading activities
• Driver competence
• Tipping, reversing
• PPE
• Practical Exam

Course Duration: 1days
No of delegates: Max 08
Certification: On successful completion an O'Reilly Safety Consultants Certificate Valid for 3 years.

+/- HIAB Other:
HIAB (Lorry Mounted Crane)
Course Aim:
This Course is designed to provide candidates with the knowledge, skills and attitude to enable them to operate crane to load & Unload Safely.
Course Content:
• Legislation
• PPE
• Pre use inspection
• Hydraulic Inspection
• Maintenance
• Loading & unloading

Course Duration: 1 Day

No of delegates: Max 4

Certification: On successful completion an O'Reilly Safety Consultants certificate will be issued valid for 3 years.

Prerequisites: 6 months operational experience, one passport size photograph, PPS Number,
Personal Protective Equipment (Hard Hat, High Visibility Vest, Safety Boots, Gloves)

+/- Forklift Training:
The aim of the course is to provide delegates with the Skills, knowledge to ensure the safe use and maintenance of Forklifts. Operating Forklift trucks is a specialised skill; many accidents are caused by untrained drivers Operating trucks.
Course Content:
• Forklift Legislation
• Daily inspection procedures
• Stability
• General Safety Rules
• Loading & stacking procedures
• Stacking & De Stacking procedures
• Material Handling
• Maintenance
• Charging & changing batteries
• Fuelling Procedures
Course Duration:
Beginners 3 / 4 days
Experienced 2 days
Refresher / Experienced 1 day

No of delegates: Max 03

Certification: on successful completion an in House Certificate & Card will be issued valid for 3 years or RTITB Accreditation if required.



+/- Scaffolding:
Basic Scaffolding
Course Objective:

To provide an opportunity for participants to demonstrate their skills, knowledge and attitude associated with the safe erection and dismantling of a range of scaffolding systems.
Candidate Requirement:

Candidates must have a minimum of six months full time experience, assisting in the erection and dismantling of a range of scaffolding. Have good communication skills. Good spatial and form perception. Candidates must have successfully completed the Manual Handling course. Cope physically and mentally with working at heights, ability to work as part of a team.
Candidates must also possess the FÁS Safe Pass Registration Card.
Candidates must be over 18 Years of Age.
Course Content:

Statutory Regulations
Health and Safety including safety policies, method statements and risk assessments
Manual Handling including identifying hazards and techniques for lifting
Fall arrest equipment - use of and inspection
Ladders, knots, slinging and gin wheels
Independent system scaffolds with return and debris fan
Birdcage scaffold
Towers - static and mobile
Bridging and pre-fabricated beams, tubes and fittings
Tying - various methods of safely tying the scaffold to the building
Duration: 7 days
No. Of Participants: 12
Certification: A FETAC National Certificate and CSCS card, which is valid for 5 years, will be awarded to each successful participant on this course

Advanced Scaffolding
Course Objective:
To provide an opportunity for participants to become competent in applying the skills,knowledge and attitudes to enable them to safely erect and dismantle a range of Scaffolding systems in tube and fitting.
Candidate Requirement:
Candidates must have a minimum of twelve months full time experience as a Basic Scaffolder. (Documentary evidence will be required from the employer to support the candidate's claim of the required experience).Candidates must have Junior Certificate or equivalent, good communication skills, good spatial and form perception. Ability to work at heights and to cope both physically and mentally, while working at heights.
Candidates must also possess the FÁS Safe Pass Registration Card.
Candidates must be over 18 Years of Age.
Course Content:
Statutory Regulations
Erection and dismantling of the following scaffolds in Tube & Fitting
A static or mobile tower
Independent scaffold with one return, loading bay, ladder beam and protective fan
Truss-out scaffold
Roof stack scaffold with access tower
Drop down scaffold off steelwork

Duration: 10 days
No. Of Participants: 12 (maximum)

Certification:
A FETAC National Certificate and CSCS card, which is valid for 5 years, will be awarded to each successful participant on this course.

+/- Driver CPC:
Driver Certificate in Professional Competence

Module 1- Control of the Vehicles and ECO driving techniques
1- Characteristics of the transmission system 
2- Effective use of Safety Controls in PSv's and LGV's 
3- Optimising fuel consumption

Module 2- Minimizing risks and managing emergencies in the transport industries
1- Risks id the roads and accidents at work
2- Ability to assess emergencies 

Module 3 – Health & Safety of the professional driver
1- The importance of physical and mental ability 
2- Preventing physical risks

Module 4- Role of the professional driver
1- Ability to adopt behavior to help enhance the image of the profession
2- Understanding the social environment of road transport and the rules governing it.

Module 5 – Professional bus driver training
1- Ensuring passenger comfort and safety
2- Loading the vehicle
3- Preventing the criminality
4- The regulations governing the carriage of passengers
5- The economic environment of the carriage of passengers by the road and the organisation of the market.

Module 6 – professional Truck driver training
1- Safely loading of vehicles
2- Preventing criminality and trafficking of illegal immigrants
3- Carriage of goods C Licence
4- The economic environment of road haulage and the organisation of markets. 

+/- Chemical Awareness:
1 Day Chemical Awareness Training 
Aim of Course: 

The course is aimed toward any individual who would have the potential of being exposed to chemicals in the workplace. The course will identify the physical health hazards associated when dealing with chemicals and the importance of using MSDS (material safety data sheets). 
The programme can be delivered specifically to individual organisational needs if required. Feel free to discuss your onsite requirements.     

Course Content:
• Legislation & employer / employee duties
• Classification of hazards when handling chemicals 
• Warning symbols & relevant warning labels  
• Contact with chemicals in the workplace   
• Material Safety Data Sheet (MSDS) 
• Route of entry of chemicals  
• System of work, permit to work & Hit works permit 
Course Duration: 1 day 

No of delegates: Max 10

Certification: on successful completion O'Reilly Safety Consultants certificated will be issued valid for 3 years.

Manual Handling
Course Aim: 
This is a half day course designed to provide the participants with the knowledge of safe Manual Handling in the areas of lifting, pushing & pulling and moving of different types of materials and equipment.
 
Course Content:
• Legislation Employer & Employee duties
• Structure of Spine, anatomy and muscular system 
• Hazards associated with lifting 
• Principals of levers and laws of motion 
• Use of equipment, Including Access equipment breathing apparatus & gas monitors 
• 8 principals handling loads safely 
• Practice in safe handling of loads
Course Duration: 1/ 2 day 

No of delegates: Max 10 

Certification: on successful completion an O'Reilly Safety Consultants certificate will be issued valid for 3 years.

Requirements: Loose comfortable clothing.

+/- Occupational First Aid:

3 Day Occupational First Aid
Aim of Course: 
Occupational First Aid course conforms to the Syllabus for FETAC Occupational First Aid as per the health & safety Authority. The course ensures that employees become competent first responders to deal with accidents in the workplace

Course Content:
• First Aid in the Workplace: legislation in relation to first aiders in the workplace  
• Patient Assessment, Scene Management how to take vital signs  
• Respiratory Emergencies Asphyxia, CPR – Practical demonstration 
• Cardiac First Response  
• Wounds & Bleeding 
• Musculoskeletal Injuries fractures sprains dislocation
• Burns Scalds, Chemical / Poisons, electric shock  
• AED Defibrillator
Course Duration: 3 days 

No of delegates: Max 10

Certification: on successful completion a FETAC Certificate will be issued valid for 3 years. 



+/- Basic First Aid:
Aim of Course: 
The aim of the course is to provide delegates with the basic level awareness in the principals of emergency First Aid.
Course Content:
• Safe accident scene management 
• Correct procedures for calling the emergency services 
• Circulation Wound & Bleeding
• CPR
• Unconsciousness 
• Fractures, Sprains, strains & dislocation
• Burns Scalds
Course Duration: 1 day 
No of delegates: Max 10
Certification: on successful completion an in House O'Reilly Safety Consultants Certificate
Valid for 2 years. 
Please note: this course does not meet an organisation Occupational First Aid requirements under the current Health & Safety Legislation; however it is an excellent way to increase awareness for First Aid in the workplace

+/- Fire Warden:
1 Day Fire Warden Training
Aim of Course: 
The aim of the course is to ensure that employees are confident to act in the capacity of Fire Warden in the workplace.   
Course Content:
• Legislation & employer / employee duties
• Role of Fire Warden  
• Fire Prevention 
• Fire Evacuation drill & Fire Fighting  
• Fuels / Fire triangle
• Source of ignition 
• Fire protection equipment 
• Pre fire planning 
• Fire & evacuation procedures 
• Practical demonstration 
Course Duration: 1 day 

No of delegates: Max 12

Certification: on successful completion an O'Reilly Safety Consultants certificated will be issued valid for 3 years.



+/- Confined Space:
Who is the course aimed towards?  
The course is aimed towards anyone who may need to enter into an area where there is a possibility of atmosphere with a deficiency or an excess of oxygen. For example Managers, supervisors & general operatives.
Course Content:
• Legislation in relation to Confined Space
• Identify a confined Space 
• Contents of entry permits 
• Duties of employer / employees 
• Safe System of work plan
• Use of equipment, Including Access equipment breathing apparatus & gas monitors 
• Dealing with emergencies 
• Coordinating contractors

Course Duration: 1 day for escape BA (10 min air supply)
2 days for Escape BA and full working BA (30 – 40 min air supply)

No of delegates: Max 10 

Certification: on successful completion a O'Reilly Safety Consultants certificate will be issued valid for 3 years.

+/- Abrasive Wheels:
Aim of Course: 
The aim of the course is to provide delegates with awareness of the hazards involved of working with Abrasive Wheels. It also provides delegates with the skills associated in mounting and Abrasive Wheel.
Course Content:
• Health & Safety Legislation 
• Identify the hazards associated working with Abrasive Wheels
• Evaluate the causes of Abrasive Wheels accidents
• Selecting & mounting
• Guarding of the grinding / cutting machines 
• Dressing & turning the wheel
• PPE
Course Duration: ½ Day

Max no of Delegates: 10
On successful completion of the course delegates will be issued with an O'Reilly Safety Consultants Certificate valid for 3 years.



+/- Working at Heights:
Aim of Course: 
Aim of the course is to ensure that delegates are competent in working with fall arrest / Working at heights equipment and to follow safe work practices.  

Course 
• Legislation 
• Safety harness difference between restraint & fall arrest 
• Safe System of work using fall arrest   
• Inspection CE marking & after use care
• Correct fitting of harness
• PPE 
• Practical Exam  

Course Duration:  half day (full day if harness inspection is required to be included) 

No of delegates: Max 10

Certification: on successful completion an O'Reilly Safety Consultants Certificate Valid for 3 years.


+/- Chainsaw Training:

Who is the course aimed towards?  
Aimed towards individuals who use Chainsaws, it provides delegates with necessary skills for the Safe Use of Chainsaws.

Course Content:
• Chainsaw Regulations 
• Basic Safety Rules 
• Introduction to working parts of the saw 
• Introduction to Personal Protective Equipment (PPE) Relating to Chainsaw  
•  3 Section Video 
• Overheads on safety Operation  
• Demonstration  
• Edging the Saw & mechanic of saw
Course Duration:  5 day

Certification: on successful completion a NPTC Certificate will be issued

+/- MEWP (Scissors & Boom):

MEWP (Mobile Elevated Work Platform)

Aim of Course:
The aim of the course is to ensure that operators become competent in the safe use of MEWP's by gaining the necessary skills and knowledge when operation an MEWP.

Course Content:
• Legislation
• Safety Awareness
• Safe operation of MEWP
• Safety Devises, stabilisers
• Safe working loads
• Ground Conditions I'd Hazards associated when operating machine
• Elevation and use of controls
• Practical & written exam

Course Duration: 1 day

No of delegates: Max 06

Certification: On successful completion an O'Reilly Safety Consultants certificate or IPAF Certificate valid for 3 years.


About Us

At O' Reilly Safety Consultants we provide specialist Occupational Health and Safety advice to our clients. We also provide specialist Occupational Health and Safety Training to fulfil your requirements. Our motto is " Let us guide you"

Contact Info

  • O'Reilly Safety Consultants
    "Pencoed"
    Old River Road,
    Castleknock, Dublin 15
    Telephone: 01 823 1007
    Mobile: 086 026 5420
    Email: info@orhsc.ie Web: www.orhsc.ie
The watch has been distilled down to its most useful state, with very rolex replica that is extraneous. I can understand the choice of a polished case for what is ostensibly a tool watch, but it seems to work well in the photos both here in the replica watches and in the live photos below. I also want to mention that throughout the article the rolex replica silicone is used, where I believe it should be silicon. Silicon is 2017 replica watches used in the semiconductor industry while silicone is a polymer used in, among other things, breast implants. Sorry to be pedantic, but the replica watches uk scientist in me can help it. This motif, popular on watch dials and replica watches is depicted here surrounded by roiling multicolored snakes, all hand painted on woolly mammoth ivory. The watch is shown on a custom hand tooled and stitched leather strap.